Resolve USB driver conflicts that prevent Qualcomm® Launcher from flashing your device.
On some Windows hosts, an incorrect USB driver can interfere with the flashing process in Qualcomm® Launcher, causing repeated qdl: unable to open USB device errors.
Flashing fails repeatedly due to a USB driver conflict
This can happen with various third-party drivers. The steps below use
third-party QDLoader driver as a representative example, but the resolution
applies broadly.
Resolution steps
1
Open Device Manager
Right-click the Start button and select Device Manager.
2
Locate the conflicting device under Ports (COM & LPT)
Expand Ports (COM & LPT) and find the third-party QDLoader 9008 entry.
Conflicting device listed under Ports (COM & LPT)
3
Open Properties and click Change settings
Right-click the third-party QDLoader 9008 entry and select Properties.
In the General tab, click Change settings. Windows prompts for elevated privileges — accept the prompt to continue.
4
Open the Driver tab and click Update Driver
In the updated Properties window, click the Driver tab.
On the Driver tab, click Update Driver.
5
Browse and pick driver from a list
Select Browse my computer for drivers.
Click Let me pick from a list of available drivers on my computer.
6
Select the Qualcomm HS-USB driver and confirm
From the list, select Qualcomm HS-USB QDLoader 9008 and click Next.
Windows installs the driver and confirms success. Click Close.
7
Verify in Device Manager and retry flashing
The device now appears under libusb-win32 devices as Qualcomm HS-USB QDLoader 9008.
Device listed under libusb-win32 devices
Return to Qualcomm® Launcher and retry the flash. The process should now proceed successfully.
Flashing proceeds successfully after the driver fix
The USB driver conflict is resolved and flashing can proceed.
After flashing is complete, you can revert to the previously installed driver
by repeating these steps and selecting it from the driver list.
Assistant
Responses are generated using AI and may contain mistakes.